|
Sn / Pb
MATERIAL SAFETY DATA SHEET
| Section 01 |
Identification |
| Info Furnished By: |
Amerway Inc.
3701 Beale Avenue
Altoona, PA 16601 |
| Date Effective: |
1/1/2008 |
| Emergency Phone: |
814-944-0200 |
| Product or Trade Name: |
Solder |
| Person to Contact: |
Terry Buck |
| Section 02 |
Constituents |
|
|
|
| Chem |
CAS |
%WT |
Carcinogen |
TLV/TWA |
| Tin |
7440-31-5 |
0-100 |
NO |
2mg/cu m ACGIH
2mg/cu m (inorganic) OSHA
0.01mg/cu m (organic) OSHA |
| Lead |
7439-92-1 |
0-100 |
NO |
0.5mg/cu m ACGIH
0.05mg/cu m OSHA (PEL) |
| Antimony |
7440-36-0 |
0-5 |
NO |
0.5mg/cu m ACGIH/OSHA |
| Silver |
7440-22-4 |
0-5 |
NO |
0.1mg/CU m ACGIH
0.01mg/cu m OSHA |
This product contains a chemical subject to SECTION 313 of SARA Title III.
| Section 03 |
Physical Data |
| Melting Point |
360-620 Degrees depending on composition |
| Boiling Point |
N/A |
| Vapor Pressure |
Not volatile |
| Vapor Density (air is 1) |
Not volatile |
| Solubility in Water |
NIL |
| Appearance and Color |
Silver or gray colored metal |
| Specific Gravity |
7-11 approx, depending on composition |
| Odor |
None |
| % Volatile |
NIL |
| ph |
N/A |
| Evaporation Rate (nBuAc=1) |
N/A |
| Section 04 |
Fire and Explosion Hazard Data |
| Flash Point/Method Used |
Not Flammable |
| Flammable Limits |
N/A |
| Extinguishing Media |
N/A |
| Fire-Fighting Equipment |
If metal is present where there is a fire, wear
self-contained breathing apparatus in case
of poisonous lead fumes. |
| Special Precautions |
None |
| Section 05 |
Reactivity Data |
| Stability: |
Stable |
| Conditions to avoid |
N/A |
| Hazardous Polymerization |
Will not occur |
| Conditions to avoid |
N/A |
| Incompatibility |
Strong acids, oxidizers, reducing agents, halogens. |
| Hazardous Decomposition |
|
| Products |
Lead fumes at high temperatures
(above 800 deg F) |
| Section 06 |
Spill, Lead and Disposal Procedures |
| Action to take for spills/leaks: |
Allow to solidify and collect in sealed drums
for disposal. |
| Disposal Method: |
Return to supplier for reprocessing |
| Section 07 |
Health Hazard Data |
| Eye: |
Dust or fume will be irritant. |
| Skin Contact: |
Not a route of entry into the body. |
| Skin Absorption: |
Not a route of entry into the body. |
| Ingestion: |
Ingestion of dust or fume must be avoided. Lead is toxic and
cumulative, affecting the kidneys, reproductive system and
nervous system. Symptoms of chronic overexposure include
anemia, insomnia, weakness, irritability, constipation and
stomach pains. Antimony is toxic and dust or fume can cause
nasal septal ulceration and stomach lining irritation. Tin is
not regarded as toxic, but excessive exposure can cause fever,
nausea, stomach cramps or diarrhea. Alloyed silver is unlikely to
be hazardous.
This product, when used for welding and similar applications,
Produces chemicals known to cause cancer and birth defects
(or other reproductive harm.)
(California Health & Safety Code 25249.5 et seq). |
| Inhalation: |
Inhalation of dust and fumes must be avoided. Irritation of nose
and bronchial tracts may occur as well as effects due to absorption
of lead, etc. in blood stream. |
| Systemic & Other Effects: |
UNK. |
| Section 08 |
First Aid Procedures |
| Eyes: |
Flush with water for 15 minutes. |
| Skin: |
Wash thoroughly with soap and water. Remove contaminated clothes. |
| Ingestion: |
Induce vomiting if person is conscious. Get medical attention. |
| Inhalation: |
Remove to fresh air. Get medical attention. |
| Note of Physician: |
N/A |
| Section 09 |
Special Handling Information |
| Ventilation: |
If fume or dust is being generated, mechanical ventilation must
be provided to maintain exposure levels below TLV’s |
| Respiratory |
|
| Protection: |
Only required if TLV’s are exceeded. Use a NIOSH/MSHA approved
respirator for toxic dust and/or fume. Note: See 29CFR1910.1025
Subpart (f) of OSHA/s Lead Standard. |
| Eye Protection: |
Wear safety glasses during soldering operations |
| Skin Protection: |
Not normally needed. |
| Other: |
N/A |
| Section 10 |
Special Precautions and Additional Information |
| Storage: |
Store in dry conditions.
No expiration date |
| Information: |
Lead use is regulated under OSHA 29CFR 1910.1025. No food or drink
should be allowed in areas where these products are handled. Personnel
must wash thoroughly after handling the metal before drinking, eating or
smoking. |
| Section 11 |
Transportation |
| Proper Shipping Name: |
Not required |
| UN Number: |
N/A |
| NA Number: |
N/A |
| Dot Exemption No.: |
N/A |
| Hazard Classes: |
N/A |
The information is given in good faith, but no warranty, express or implied is made.
|