Amerway, Inc.
                                                                                         Quality Through People and Technology

Sn 60 Solder No Clean Core Wire

MATERIAL SAFETY DATA SHEET

Section 01 Identification
Info furnished by: Amerway, Inc.
3701 Beale Avenue
Altoona, PA 16601
Date Effective: 01-01-2008
Emergency Phone: 814-944-0200
Chemtrec 800-424-9300
Product or Trade Name Sn60 NCCW
Person to Contact Terry Buck
Section 02 Constituents      
Chem CAS %WT Carcinogen TLV/TWA
Tin 7440-31-5 50-70 NO 2mg/cu m ACGIH
Lead 7439-92-1 20-50 NO 0.15mg/cu m ACGIH
Rosin 8050-09-7 1-3 NO N/A
Treade Secret N/A Less than 0.6 NO N/A

Product contains a chemical subject to SECTION 313 of SARA Title III

Section 03 Physical Data
Melting Point Approx. 376 Fahrenheit
Boiling Point N/A
Vapor Pressure Not volatile
Vapor Density (air is 1) Not volatile
Solubility in Water NIL
Apprence & Color Metal Wire/ silver color
Specific Gravity 7-11 approx. , depending on composition
Oder Slight
%Volatile 0-4%
ph N/A
Evaporation Rate(nBuAc=1)  
Section 04 Fire & Explosion Hazard Data
Flash Point/Method Used Not Flammable (flux only 350 deg F c.c.)
Flammable Limits Not Est.
Extinguishing Media N/A
Fire-fighting equipment If metal is present where there is a
fire, wear self-contained breathing
apparatus.
Special precautions None
Section 05 Reactivity Data
Stability: Stable
Conditions to avoid N/A
Hazardous Polymerization: Will not occur
Conditions to avoid N/A
Incompatibility: Strong acids, oxidisers, reducing agents,
halogens.
Hazardous Decomposition  
Products:

Lead Fumes ar high tempertures

(above 800 degrees F.)

Section 06 Spill, Leak and Disposal Procedures
Action to take for spill/leaks: Allow to solidify and collect in
sealed drums for disposal.
Disposal Method: Return to supplier for reprocessing
Section 07 Health Hazard Data
Threshold Value Limit of the flux alone is 18mg/m3 (10 ppm)
Eye: Dust or fume will be irritant to eyes nose & throat.
Skin Contact: Not a route of entry into the body.
Skin Absorption: Not a route of entry into the body.
Ingestion: Ingestion of dust of fume must be avoided.
Lead is toxic and cumulative, affecting the kidneys,,
reproductive system and nervous system. Systoms of
chronic overexposure include anemia, insomnia,
weakness, irritability, constipation and stomach
Pains. Tin is not regarded as toxic but excessive
exposure can cause fever, nausea, stomach cramps or diarrhea.
This product, when used for welding and similar
applications, produces chemicals known to cause
cancer and birth defects (or other reproductive harm).
(California Health & Safety Code 25249.5 et seq).
Inhalation: Inhalation of dust and fumes must be avoided.
Irritation of nose and bronchial tracts may occur as
well as effects due to absorption of lead, etc. in blood stream.
Systemic & Other Effects: UNK.
Section 08 First Aid Procedures
Eyes: Flush with water for 15 minutes.
Skin: Wash thoroughly with soap and water. Remove
contaminated clothing.
Ingestion: Induce vomiting if person is conscious. Get medical attention
Inhalation: Remove to fresh air. Get medical attention.
Note to Physician: N/A
Section 09 Special Handling Information
Ventilation: If fume or dust is being generated, mechanical
ventilation must be provided to maintain exposure
level below TLV’S.
Respiratory  
Protection: Only required if TLV’s are exceeded. Use a
NIOSH/MSHS approved respirator for toxic dust
and/or fume.
Eye Protection: Wear safety glasses near hot metal.
Skin Protection: Not normally needed.
Other: N/A
Section 10 Special Precautions & Additional Information
Storage Store in dry conditions
Handling  
Information: No food or drink should be allowed in areas where
these products are handled. Personnel must wash
thoroughly after handling the metal before drinking
eating or smoking.
Section 11 Transportation
Proper Shipping Name: Not Required
UN Number N/A
NA Number N/A
Dot Exemption No.: N/A
Hazard Classes: N/A


This information is given in good faith, but no warranty, express or implied, is made.

 
      Website by Precision Business Solutions                                                                                                                                       © Amerway.com