Amerway, Inc.
                                                                                         Quality Through People and Technology

Lead Free Rosin Core

MATERIAL SAFETY DATA SHEET

Section 01 Identification
Info furnished by: Amerway, Inc.
3701 Beale Avenue
Altoona, PA 16601
Date Effective: 01-01-2008
Emergency Phone: 814-944-0200
Chemtrec 800-424-9300
Product or Trade Name Lead Free Solder
Person to Contact Terry Buck
Section 02 Constituents      
Chem CAS %WT Carcinogen TLV/TWA
Tin 7440-31-5 96 NO 2mg/cu m ACGIH
2mg/cu m (inorganic) OSHA
0.1mg/ cu m (organic) OSHA
Silver 7440-22-4 <5 NO 0.1mg/cu m AACGIH/OSHA
Rosin 8050-09-07 <4 NO 10mg/cu m OSHA (PEL)
Trade SECRET   <.6 NO N/A
Section 03 Physical Data
Liquidus & Sloidus
445 Degtrees F

Boiling Point
N/A
Vapor Pressure Not volatile
Vapor Density (air is 1) Not volatile
Solubility in Water NIL
Appearance & Color
Silver, graynt brown
Specific Gravity 7.3
Odor None
%Volatile NIL
ph N/A
Evaporation Rate(nBuAc=1) N/A
Section 04 Fire & Explosion Hazard Data
Flash Point/Method Used Not Flammable
Flammable Limits N/A
Extinguishing Media N/A
Fire-fighting equipment If metal is present where there is a fire, wear self-contained breathing apparatus.
Special precautions None
Section 05 Reactivity Data
Stability: Stable
Conditions to avoid N/A
Hazardous Polymerization:
Will not occur
Conditions to avoid N/A
Incompatibility: Strong acids, oxidisers, reducing agents, halogens.
Hazardous Decomposition  
Products: Antimonial fumes at high tempertures
Section 06 Spill, Leak and Disposal Procedures
Action to take for spill/leaks: Allow to solidify and collect in sealed drums for disposal.
Disposal Method: Return to supplier for reprocessing
Section 07 Health Hazard Data
Eye: Dust or fume will be irritant.
Skin Contact: Not a route of entry into the body.
Skin Absorption: Not a route of entry into the body.
Ingestion: Ingestion of dust of fume must be avoided.
Tin is not regarded as toxic but excessive exposure can cause fever, nausea, stomach cramps or diarrhea.
Inhalation: Inhalation of dust and fumes must be avoided.
Systemic & Other Effects: Unknown
Section 08 First Aid Procedures
Eyes: Flush with water for 15 minutes.
Skin: Wash thoroughly with soap and water. Remove
contaminated clothing
Ingestion: Induce vomiting if person is conscious. Get medical
attention.
Inhalation: Remove to fresh air. Get medical attention.
Note to Physician: N/A
Section 09 Special Handling Information
Ventilation: If fume or dust is being generated, mechanical ventilation must be provided to maintain exposure level below TLV’S.
Respiratory  
Protection: Only required if TLV’s are exceeded. Use a
NIOSH/MSHS approved respirator for toxic dust
and/or fume.
Eye Protection: Wear safety glasses near hot metal.
Skin Protection: Not normally needed.
Other: N/A
Section 10 Special Precautions & Additional Information
Storage Store in dry conditions.
Handling  
Information: No food or drink should be allowed in areas where
these products are handled. Personnel must wash
thoroughly after handling the metal before drinking
eating or smoking.
Section 11 Transportation
Proper Shipping Name: Not Required
UN Number N/A
NA Number N/A
Dot Exemption No.: N/A
Hazard Classes: N/A

 

This information is given in good faith, but no warranty, express or implied, is made.

 
      Website by Precision Business Solutions                                                                                                                                       © Amerway.com