|
Amerway Radiator Red Flux Technical Data Bulletin
Technical Data Sheet
| Description: |
| Amerway Radiator Red Flux is a specially formulated product for automotive
copper - brass radiators and heater coil soldering applications The Amerway Radiator
Red Flux is a strong zinc chloride based inorganic type flux which provides superior
fluxing ability and strong solder bonding to radiator surfaces. |
| Application: |
| Amerway Radiator Red Flux was developed for applications in the soldering of
automotive radiator and heater cores. It is especially recommended for tube to header
and tank soldering, hand and automated assembly soldering operations as well as radiator
repair. |
| Residue Removal: |
| Flux residue left after soldering may be corrosive under some circumstances. If
post soldering residue removal is considered necessary, a mild detergent wash and hot
water rinse is recommended. |
| Physical Properties: |
|
| Specific Gravity @ 25 C |
1.36 |
| Pounds / Gallon |
11.32 |
| pH |
less than 0.5 |
| Odor |
slightly acidic |
| Color |
clear red |
| Safety: |
| Amerway Radiator Red Flux is non-flammable material. However, standard
precautions for handling acid material should be observed when handling this product. |
| Packaging: |
| Amerway Radiator Red Flux is available in 1 gallon containers, 5 gallon
containers and 55 gallon drums. |
| Disclaimer: |
| The information contained herein is based on data considered accurate and is
intended for use by persons having technical skill, at their own discretion and risk. Since
conditions of use are outside of Amerway’s control, we can assume no liability for results
obtained or damages incurred through the application of data presented, nor can we
assure customers of liability. |
|
