|
Amerway EnviroSolve-50 Flux Remover Technical Data Bulletin
Technical Bulletin
| Description: |
| Amerway EnviroSolve-50 is a specially blended solvent for the cleaning of
printed circuit boards where aqueous systems are not compatible with the components,
such as key boards, and open devices. This product was designed to remove rosin and
resin flux residues as well as residues from no-clean and organic acid type fluxes. |
| Benefits: |
Non-Ozone Depleting
|
| Compatible with Most Plastics |
| Zero Residues |
| Rapid Evaporating |
| Non-Corrosive |
| Physical Data: |
|
| Specific Gravity @ 25o C: |
0.803 |
| Pounds/Gallon: |
6.69 |
| Boiling Point: |
176o F |
| Odor: |
Alcoholic |
| Appearance & Color: |
Water White & Clear |
| % Volatiles: |
100% |
| Flash Point: |
52O F, T.C.C. |
| Packaging: |
| Amerway EnviroSolve-50 is available in one-gallon metal containers, five-gallon
metal pails and fifty five gallon metal drums. |
| Safety and Precautions: |
| The Amerway EnviroSolve-50 is a flammable product and should be handled as
such. As with all Amerway products a Material Safety Data Sheet is available and should
be reviewed before using this product. |
| Disclaimer: |
The information contained herein is based on data considered to be accurate and
is intended for use by persons having technical skill, at their own risk. Since conditions
of use are outside of Amerway’s control, we can not assume liability for the results
obtained or damages incurred through the application or data presented, nor can we
assure customers of liability. |
|
