Quality Through People and Technology
Amerway #70 Water Soluble Plumbing Paste
Technical Data Sheet
| Description: | |||
| The Amerway #70 is a Water-soluble paste flux specially formulated for use on copper tubing in the plumbing industry. The Amerway Paste Flux #70 is a strong zinc chloride based, lead free flux, which provides superior fluxing ability, and strong solder bonding on copper plumbing for industrial and household needs. |
|||
| Application: | ||||
| Clean all surfaces prior to soldering or making repairs. Remove all corrosion, dirt or paint from surfaces to be soldered. Apply flux with a brush on all surfaces to be soldered. Solder will not flow on surfaces that have not been fluxed. When soldering copper tubing for plumbing, apply flux on both fittings and tubing. Apply solder to joining surfaces while maintaining heat. When the joint is covered or filled, remove heat and allow solder to cool undisturbed. |
||||
| Residue Removal: | ||||
| Flux residue may be corrosive under some circumstances. If post solder residue removal is considered necessary, a rinse with tap water is recommended. |
||||
| Safety: | ||||
| Amerway Water Soluble Paste Flux # 70 is a non-flammable product. However, standard precautions for handling acid material should be observed when handling this product. Refer to the Material Safety Data Sheet for more safety information. |
||||
| Disclaimer: | ||||
| The information contained herein is based on data considered to be accurate and is intended for use by persons having technical skill, at their own discretion and risk. Since conditions of use are outside of Amerway’s control, we can not assume liability for the results obtained or damages incurred through the application or data presented, nor can we assure customers of liability. |
||||