|
Amerway #400-50 RA Rosin Flux Technical Data Bulletin
Technical Data Sheet
| Description: |
| Amerway 400-50 Rosin Flux is an RA type product specifically formulated to be used in
difficult to solder applications such as wire tinning. Heavily oxidized surfaces and
difficult to solder base metals such as nickel or brass can be soldered with this product. |
| Benefits: |
|
| |
- Provides excellent solder ability on difficult to solder surfaces. |
| |
- Excellent capillary action. |
| |
- Pure water white rosin ensures consistent soldering results. |
| Application: |
| Amerway 400-50 can be applied by wave, dip or brush methods. If thinner is required,
use Amerway 405 Thinner. |
| Residue: |
| The residue remaining after soldering is considered non-hygroscopic. When the residue is
not cleaned, it acts as a conformal coating protecting the assembly from moisture. For
critical applications where the highest reliability is required, cleaning is recommended.
Residue can be cleaned with Amerway 900 Enviro-Clean-25 saponification system in
water. |
| Physical Data: |
|
|
| |
Flux Type |
RA |
| |
Specific Gravity @ 25 C |
0.913 |
| |
Flash Point |
58 F Seta flash |
| |
Color |
Amber |
| |
Solids Content |
50 % |
| Packaging: |
| Amerway 400-50 flux is available in 1 gallon bottles, 5 gallon pails and 55 gallon drums. |
| Disclaimer: |
| The information contained herein is based on data considered to be accurate and is
intended for use by persons having technical skill, at their own discretion and risk. Since
conditions of use are outside of Amerway’s control, we can not assume liability for the
results obtained or damages incurred through the application or data presented, nor can
we assure customers of liability. |
|
