|
Amerway #1400 Plumbing Paste Flux Technical Data Bulletin
| Description: |
| The Amerway 1400 is a water-soluble paste flux specially formulated for
use on copper tubing in the plumbing industry. The Amerway Paste Flux 1400 is a
strong zinc chloride based, lead free flux, which provides superior fluxing ability and
strong solder bonding on copper plumbing for industrial and house hold needs. |
| Application: |
| Clean all surfaces prior to soldering or making repairs. Remove all
corrosion, dirt or paint from surfaces to be soldered. Apply flux with a brush on all
surfaces to be soldered. Solder will not flow on surfaces that have not been fluxed.
When soldering copper tubing for plumbing, apply flux on both fittings and tubing.
Apply solder to joining surfaces while maintaining heat. When the joint is covered or
filled, remove heat and allow solder to cool undisturbed. |
| Residue Removal: |
| Flux residue may be corrosive under some circumstances. If post
solder residue removal is considered necessary, a rinse with tap water is recommended. |
| Safety: |
| Amerway 1400 Paste Flux is a non-flammable product. However, standard
precautions for handling acid material should be observed when handling this product. |
| Disclaimer: |
| The information contained herein is based on data considered to be
accurate and is intended for use by persons having technical skill, at their own discretion
and risk. Since conditions of use are outside of Amerway’s control, we cannot assume
liability for the results obtained or damages incurred through the application or the data
presented, nor can we assume customers liability. |
|
