|
Amerway #1200 Silver Solder Flux Technical Data Bulletin
Technical Data Sheet
| Description: |
| The Amerway 1200 Silver solder Flux is a strong Zinc activated inorganic type product
designed for hard to solder surfaces when using a silver solder. Its unique formulation
produces superior fluxing ability with less corrosive residue after soldering then usually
found with other Zinc activated fluxes. |
| Application: |
| The Amerway 1200 Silver Solder Flux was designed for application procedures such as
dipping, spraying or brushing and can be applied at room temperature. |
| Uses: |
| The Amerway 1200 Silver Soldering Flux is compatible with stainless steel, carbon steel
as well as copper and brass Alloys such as in the automotive radiators and heater cores.
This flux can also be used in the repair work of radiators and heater cores. |
| Residue Removal: |
| After soldering, flux residue may be corrosive under some circumstances. If post
soldering residue removal is required, a mild wash with a baking soda solution, followed
by a hot water rinse is recommended. |
| Physical Properties: |
|
| |
Specific Gravity @ 25 C |
1.50 |
| |
Pounds / Gallon |
12.50 |
| |
Percent Volatiles |
65% |
| |
pH |
1.0 |
| |
Solubility in water |
100% |
| |
Color |
clear-light gray liquid |
| |
Odor |
slightly acidic |
| Safety: |
| Handle as a corrosive liquid. This product is a non-flammable liquid. As with all
Amerway products, a Material Safety Data Sheet is available with this product. |
| Packaging: |
| Amerway 1200 Silver Soldering Flux is available in 1 gallon containers, 5 gallon
containers and 55 gallon drums. |
| Disclaimer: |
| The information contained herein is based on data considered accurate and is intended for
use by persons having technical skill, at their own discretion and risk. Since conditions
of use are outside of Amerway’s control. We can assume no liability for results obtained
or damages incurred through the application of data presented, nor can we assure
customers of liability. |
|
